KNOWLEDGE BASE ARTICLE

How to Change SNMP Settings in Umango

Umango uses SNMP (Simple Network Management Protocol) to discover and interact with supported multifunction devices (MFDs) on the network. These settings can be customized via the Advanced Configuration Screen.

Default SNMP Settings

By default, Umango uses the following SNMP settings for discovery:

Setting Description Setting Name Default Value
*SNMP Version SNMPVersion 2
SNMP Port SNMPPort 161
SNMP Community SNMPCommunity public

* Versions prior to 2.4.0.1 were set to SNMPv1 by default

How to Modify These Settings

  1. Access the Advanced Configuration Screen
    Visit: https://umango.com/KB?article=127
  2. Change the SNMP Settings
    In the Advanced Configuration table, add or edit the following keys:
    • SNMPVersion: Set to 1, 2 (version 3 not supported)
    • SNMPPort: Typically 161
    • SNMPCommunity: Typically public but set to your device's SNMP community
  3. Save and Apply
    After updating the settings, save your changes.
    Restart discovery or services as needed.
Notes:
  • SNMPv3 is not fully supported.
  • If no override is provided, the default values shown above will be used.
  • You can verify device visibility by running a discovery in the Umango Dashboard.

Link to this article https://umango.com/KB?article=147

Related Tags

snmpv1 snmpv2 snmpv3 snmp discovery
© Umango Pty Ltd
Powered by HTML5